Coal Production Flow in Lipp Silo

Explore the Use of Lipp Silo Coal Storage Process

Production Flow 

A complete set of coal silo system includes feeder system, dedusting system, gas path arch breaking device, the lipp silo body, electrical control system, under carriage, guardrail and other components.

On the top of coal silo, there equipped with an electric dedusting device, which can reduce the amount of pollution on the surrounding environment. When dust accumulate to a certain degree on the top of dust catcher, it’s easy to start the vibration motor to shake them off through electrical control.

There also equipped with a level e sensor on the top of the lipp silo, or equipped with a radio-frequency capacitive material level limit switch both on the top and bottom of the coal silo.

When the switch is on, we can be aware of the body height of materials inside the silo through the electrical signals and then analyze the inventory of coal or other powders.

On the cones of silo bottom, there equipped with an air blowing arch breaker. By using small electromagnetic directional valve in the pneumatic box, it’s available to control the release compressed air, which helps to the broken arch of coal powder and avoid accumulated plugging. The air supply can be provided through gas circuit by supporting stirring device, and the start of air blowing arch breaker can be controlled by electrical system according to the supply time of coal powders. Namely, when the material supply time is beyond the set time, the automatic blowing broken arch can also be controlled manually.

Conveying powder material from feeding tube to coal (fly ash) silo, bulk coal or fly ash can be directly sent to the silo by bulk material vehicles.

Coal silo is provided with a coal silo grounding protection device.

Type of silo layout can be set according to the requirements of the factory. In the selection of steel silo should be according to the actual needs and circumstances to choose.